|Certificate:||CE & ISO9001||Condition:||New|
|Voltage:||380V 50HZ||Automatic:||Fully Automatic|
|Color:||White , Bule , Black , Yellow||Dimension(L*W*H):||According To Model|
|Place Of Origin:||Shandong , China||Port:||QINGDAO Port|
Plastic Profile Production Line,
Plastic Profile Extruder
High Performance Double Screw Plastic Profile Extrusion Line Fully automatic
PVC profile extrusion line is mainly used to produce PVC profile like PVC window, PVC door, PVC ceiling, and PVC wall board PVC floor and so on.
The main components of PVC profile machine including:
1. Powder feeder
2. Twin-screw extruder
3. Vacuum calibration table
4. Haul-off unit
5. Cutting unit
6. Profile stacker
Auxiliary machines of PVC profile machine:
1. Mixing unit
2. Crusher and milling machine
4. Chiller and air compressor...Etc
1. The working process of PVC Ceiling Production Line:
Raw material ---- mixing ---- auto feeder ---- plastic extruder ---- mould ----- vacuum forming table ---- haul-off unit ---- auto cutting machine ---- stacker.
Auxiliary equipments are mixer, crusher, pulverizer, air compressor , lamination machine, printing machine and so on.
2. This machine is mainly used to produce PVC window & door profiles, PVC trunking profiles, PVC ceiling profiles, PVC panel, PVC board and so on. This PVC profile production line adopts advanced design concept to ensure the efficient extrusion of PVC material, combined with the unique concept of plasticization screw design to ensure uniformity of plastic extrusion, high capacity production.
3. This machine uses the special designed screw and barrel , die and extrusion process to produce plastic and wood products , the series of products are: One step thick plastic and wood plate extrusion machine , one step plastic and wood profile profile extrusion machine , one step plastic and wood decoration plate extrusion machine , plastic and wood pelletizing manchine and different kinds of plastic and wood dies.
Profiles for the building industry
--door frame and board
Profiles for furnishing
--furniture edge bands
|Vacuum degree (MPa)||-0.08--0.09||-0.08--0.09|
|Center height of T type dies (mm)||320||320|
|Height from ground to die (mm)||890-1100||890-1100|
|Moving distance of vacuum calibration table (mm)||400||500|
|Hauling speed (m/min)||0.3-7.8||0.1-4|
|Hauling force (KN)||7.5||30|
|Effective hauling length (mm)||1.0||1.8|
|Width of rubber (mm)||180||240|
|Cutting linear velocity (m/s)||58.6||58.6|
|Max. Cutting section (mm)||180×65||240×65|
1) We give you suitable suggestions according to your actual need.
2) Technical support: available lifelong
3) Under the right operation way, the screw and barrel is for 10000 working hours.
4) Our expert will answer any inquiry within 48 hours and it will be solved as soon as possible.
5) The customer can send the engineer to our company with training
Contact Person: AORUI